Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Gas leak detector solution
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation and clearance from combustible materials.
- Remove Packaging Materials: Remove all protective films and packaging materials from the stove surface.
- Gas Connection: Connect to gas supply line using approved flexible gas connector. Apply pipe joint compound to all threaded connections.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Anti-tip Bracket: Install anti-tip bracket to wall or floor according to manufacturer instructions.
- Level the Stove: Adjust the leveling legs to ensure the stove is level from front to back and side to side.
- Leak Test: Test all gas connections for leaks using leak detector solution. Bubbles indicate a leak.
- Test Operation: Test all burners and oven functions to ensure proper operation.
Specifications
| Model Series | FGIF3036TF |
| Type | Gas Range with Convection Oven |
| Color | Stainless Steel / Black |
| Burner Configuration | 5 Sealed Burners |
| Burner Output | 18,000 BTU (Power Burner) |
| Oven Capacity | 5.3 cu. ft. |
| Control Type | Knob Controls with Digital Display |
| Energy Source | Natural Gas / LP Convertible |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 36 x 30 x 28 inches |
| Weight | 145 lbs |
| Warranty | 1 Year Full Warranty |
Warranty Information
- Full Warranty: 1 year parts and labor
- Burner Warranty: 5 years on sealed burners
- Additional Coverage: Optional extended warranty available
For warranty service, contact Frigidaire Customer Service at 1-800-374-4432 or visit Frigidaire.com
Key Features
PowerPlus™ Burner System
Professional-grade 18,000 BTU PowerPlus™ burner delivers rapid boiling and high-heat performance for demanding cooking tasks.
EvenBake™ Convection System
Advanced convection technology with third heating element ensures even heat distribution for perfect baking results every time.
Air Fry Capability
Built-in air fry function allows for healthier cooking with up to 75% less fat compared to traditional deep frying methods.
Quick Preheat
Rapid preheat function gets the oven to temperature faster, saving time and energy during meal preparation.
Stainless Steel Construction
Professional-grade stainless steel construction provides durability and easy cleaning with fingerprint-resistant finish.
Precise Simmer Burner
Dedicated 5,000 BTU simmer burner provides precise low-heat control for delicate sauces and melting operations.
Cooking Modes Explained
Convection Bake
Even heat distribution for perfect baking of cookies, cakes, and pastries
Convection Roast
Circulated heat for evenly roasted meats and vegetables with crispy exteriors
Air Fry
High-speed air circulation for crispy fried foods with minimal oil
Broil
High-heat top element for browning and caramelizing foods quickly
Warm
Low-temperature setting to keep cooked foods warm without drying out
Self Clean
High-temperature cycle that turns spills and splatters to ash for easy cleaning
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't light | Gas supply off, clogged burner ports, faulty igniter | Check gas supply, clean burner ports, check igniter operation |
| Uneven cooking | Oven not level, improper rack position, faulty temperature sensor | Level the oven, use correct rack position, check temperature calibration |
| Gas odor | Gas leak, food spillage, improper burner assembly | Check for gas leaks, clean burners, ensure proper assembly |
| Oven not heating | Power issue, faulty bake element, temperature sensor failure | Check power supply, inspect heating elements, test temperature sensor |
| Error codes displayed | Sensor failure, control board issue, wiring problem | Refer to error code chart, check connections, reset power |
| Self-clean not working | Door not locked, faulty lock mechanism, control issue | Ensure door locks properly, check lock mechanism, reset control |
Error Codes
- F10: Oven temperature sensor issue - Check sensor connection
- F11: Oven temperature too high - Check for blocked vents
- F12: Control board communication error - Reset power
- F20: Shorted key - Check control panel for moisture
- F30: Door lock failure - Check door lock mechanism
- F40: Temperature calibration needed - Run calibration cycle
Manual Downloads
Current Model Manuals
FGIF3036TF
30" Professional Gas Range
FGIF3036TB
30" Black Gas Range
FGIF3036TW
30" White Gas Range
FGIF3666TF
36" Professional Gas Range
Popular Previous Models
FGGF3036TF
30" Gallery Series Gas Range
FGGF3058TF
30" Gallery Series with Air Fry
FGIF3036TFB
30" Professional Black Stainless
FGIF3026TF
30" Professional Basic Model