Safety Instructions
Important Safety Warnings:
- Never use commercial oven cleaners in self-cleaning ovens
- Remove all oven racks before starting self-cleaning cycle
- Ensure kitchen is well-ventilated during cleaning cycle
- Keep children and pets away from oven during cleaning
- Do not attempt to open oven door during cleaning cycle
Pre-Cleaning Safety Checklist
- Remove All Items: Take out all oven racks, baking stones, and any other accessories.
- Clean Spills: Wipe up large spills or grease deposits to prevent excessive smoke.
- Check Door Seal: Ensure oven door seal is intact and clean for proper closure.
- Clear Surroundings: Remove any flammable materials from around the oven.
- Ventilation: Turn on kitchen exhaust fan or open windows for proper ventilation.
- Child Safety: Engage oven door lock if available to prevent accidental opening.
- Timer Setting: Set the cleaning cycle for the recommended time (usually 2-4 hours).
Preparation Steps
| Model Series | FGFE, FGIF, FGIS Series |
| Oven Type | Electric Self-Cleaning |
| Cleaning Time Options | 2, 3, or 4 hours |
| Temperature Range | 880°F (471°C) during cleaning |
| Door Lock | Automatic thermal lock |
| Control Type | Electronic Touch Controls |
| Power Requirements | 240V, 60Hz, 30A |
| Cleaning Frequency | As needed, typically monthly |
Items to Remove Before Cleaning
- Oven Racks: All removable oven racks must be taken out
- Probe Thermometer: Remove temperature probe if present
- Baking Stones: Any pizza stones or baking tiles
- Broiler Pan: Remove broiler pan and grid
- Storage Drawer: Empty storage drawer if present
For additional preparation guidance, contact Frigidaire Customer Service at 1-800-374-4432 or visit Frigidaire.com
Self-Cleaning Process
Initiating Self-Clean
Press and hold the "Clean" button for 3 seconds until the clean indicator light illuminates. Select desired cleaning time (2, 3, or 4 hours) based on soil level.
Door Lock Activation
The oven door will automatically lock once cleaning cycle begins. The "Lock" indicator light will remain on throughout the cleaning process for safety.
High-Temperature Cleaning
During the cycle, oven temperature rises to approximately 880°F (471°C), reducing food soils to fine ash that can be easily wiped away after cooling.
Cool Down Phase
After cleaning time completes, the oven enters cool down phase. The door remains locked until interior temperature drops below 600°F (315°C).
Post-Cleaning Care
Once unlocked, wipe interior with damp cloth to remove ash residue. Do not use abrasive cleaners or scouring pads on oven surfaces.
Cycle Interruption
To stop cleaning cycle, turn oven control to "Off." The door will remain locked until safe temperature is reached, which may take 30-60 minutes.
Cleaning Time Recommendations
2-Hour Cycle
Light soil conditions, regular maintenance cleaning
3-Hour Cycle
Moderate soil, typical monthly cleaning
4-Hour Cycle
Heavy soil, baked-on spills, quarterly deep cleaning
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Self-clean won't start | Door not closed properly, control lock engaged | Ensure door is fully closed, check control lock settings |
| Excessive smoke during cleaning | Heavy grease deposits, large food spills | Wipe up major spills before starting, use shorter cycle time |
| Door won't open after cleaning | Oven still too hot, door lock mechanism engaged | Wait for oven to cool completely, lock will release automatically |
| Error code displayed | System malfunction, temperature sensor issue | Turn oven off for 1 minute, then retry. If persists, call service |
| Unusual odors | Normal during first few uses, plastic packaging residue | Run empty baking cycle before first self-clean, ensure proper ventilation |
| Incomplete cleaning | Insufficient cleaning time, extremely heavy soil | Use longer cleaning cycle, manually remove heavy deposits first |
Error Codes
- F10: Oven temperature too high - Allow to cool and restart
- F11: Oven temperature sensor issue - Contact service
- F12: Control panel communication error - Power cycle oven
- F20: Door lock mechanism failure - Contact service
- F30: Heating element issue - Contact service
- F90: Control board error - Power cycle, if persists contact service
Manual Downloads
Current Self-Cleaning Models
FGFE3048TF
30" Self-Clean Electric Range
FGIF3036TF
30" Induction Self-Clean Range
FGIS3065TF
30" Gallery Induction Range
FGFE3665TF
36" Professional Range
Popular Previous Models
FEFS3658SC
36" Stainless Steel Range
FFEF3054TS
30" Freestanding Electric Range
FGET3065PF
30" Smoothtop Electric Range
FGFS3636TF
36" Front Control Range